BACK
Code 15041

TORRETTA TRM 15 ED 4P

Centrifugal roof fans with horizontal discharge for hot fumes extraction

Description

• Centrifugal roof fan suitable for extracting hot fumes at up to 400 °C for 120 minutes.
• Base manufactured from phosphated pressed steel, epoxy powder coated with hammered effect finish, guaranteeing long-term resistance to atmospheric agents.
• Aerodynamically contoured inlet port for optimum performance, fashioned as a single unit with the base and gauged to optimize air flow.
• Motor mounting plate made of steel with galvanization surface treatment.
• Pressed steel motor cover: pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Accident prevention and anti-bird grilles (to UNI ISO 13857 standard), consisting of electrically welded steel rings with epoxy powder coated finish, colour black.
• Centrifugal impeller with self-cleaning backward curved blades, dynamically balanced (UNI ISO 1940, Point 1 – Class 6.3), made of electrolytically galvanized pressed steel.
• 1 speed single phase AC motor with shaft turning in ball bearings, size to UNEL MEC standard, flange B5, self-ventilating. Motor insulation class H, with metal cooling fan and cable gland.
• Maximum air flow: 1400 m3/h.
• Equipped with a motor start capacitor that must be installed remotely from the fan so that it cannot be damaged through direct exposure to heat.
• Galvanized steel eye lugs for transport and lifting/handling operations.
• Cable guaranteeing continuity of earth connection.
• Steel safety wire for anchoring the appliance once installed.
Read full descriptionClose description

Certifications


Technical Data Sheet

  • Absorbed Current max (A)
    0,60
  • Absorbed Power max (W)
    140
  • Frequency (Hz)
    50
  • Insulation Class
  • Max ambient temperature for continuous operation (°C)
    90
  • Motor IP protection
    55
  • Nominal Diameter (mm)
    250
  • Number of Phases (Ph)
    1
  • Number of Poles
    4
  • Voltage (V)
    220-240
  • Weight (Kg)
    19
  • Delivery max (l/s)
    389
  • Delivery max (m³/h)
    1400
  • Pressure max (mmH2O)
    24
  • Pressure max (Pa)
    235
  • RPM
    1315
  • Sound Pressure level Lp [dB (A)] 3m
    58,5
  • Size A (mm)
    600
  • Size B (mm)
    410
  • Size C (mm)
    357
  • Size D (mm)
    309
  • Size E (mm)
    166
  • Size F (mm)
    38
  • Size G (mm)
    26,5
  • Size H (mm)
    513
  • Size L (mm)
    206
  • Size M (mm)
    211
  • Size N (mm)
    319
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

IRM 30
IRM 30
• Single phase speed controller.
TR-CU 10/15 (CONTROTELAIO DI BASE U.)
TR-CU 10/15 (CONTROTELAIO DI BASE U.)
• <b>Installation base counter-frame.</b>
TR-G 10/15 (GRIGLIA DI PROTEZIONE)
TR-G 10/15 (GRIGLIA DI PROTEZIONE)
• <b>Intake port protection grille for use when the unit is mounted within reach.</b>
IREM 3                       CD 99250080
IREM 3 CD 99250080
• Single-phase electronic speed controller
IREM INVERTER 4 M
IREM INVERTER 4 M
<b> Single-phase speed controller</B>
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info