Industrial ventilation
To change the air in warehouses, gyms, hospitals and large size rooms.
20
PRODUCTS
TORRETTE TR ED-V
Centrifugal roof fans with vertical discharge for hot fumes extraction
Suitable for application in residential and industrial environments, for factories, hospitals, nightclubs, officies, theatres, apartment blocks, gyms, restaurants, etc... Easy to install on top of all roofs. Vertical air extraction with polyester
painted, galvanised steel reinforcements.
Show products
CLOSE
20
PRODUCTS
TORRETTE TR-ED
Centrifugal roof fans with horizontal discharge for hot fumes extraction
Centrifugal roof fans with air flow rates between 890 m3/h and 18000 m3/h suitable for extracting hot fumes at up to 400 °C for 120 minutes. The structure comprises a base of square geometry incorporating the inlet port, a cylindrical safety grille, motor and terminal box, impeller and protective cap.
Show products
CLOSE
20
PRODUCTS
TORRETTE TR-E
Centrifugal roof fans with horizontal discharge
Centrifugal roof fans with air flow rates between 1100 m3/h and 18000 m3/h. The structure comprises a base of square geometry incorporating the inlet port, a cylindrical safety grille, motor and terminal box, impeller and protective cap.
Show products
CLOSE
20
PRODUCTS
TORRETTE TR E-V
Centrifugal roof fans with vertical discharge
Vertical exhaust centrifugal roof fans for air flow rates between 1100 m3/h and 18000 m3/h. The structure comprises a base of square geometry incorporating the inlet port, a cylindrical safety grille, motor complete with terminal box,
impeller, protective cap, and baffles positioned to divert the extracted air upwards.
Show products
CLOSE
9
PRODUCTS
C-ATEX
Centrifugal fans for installation in potentially explosive areas
Industrial centrifugal fans suitable for use in environments characterized by potentially explosive atmospheres created due to the presence of gas or dust identifiable with Group II (according to Atex classification).
Show products
CLOSE
21
PRODUCTS
VORTICENT C E
Centrifugal fans
Centrifugal roof fans characterized by high efficiency, with air flow rates between 244 m3/h and 6800 m3/h. Construction featuring scroll and inlet port fashioned in one piece, plus motor complete with wiring box, and impeller.
Show products
CLOSE
16
PRODUCTS
VORTICEL MP
Medium-pressure plate axial fans
Wall-mounting axial flow fans characterized by high efficiency and low noise emissions, with diameters between 250 and 600 mm and air flows from 1,150 m3/h to 14,500 m3/h. Structure: mounting panel of square outline incorporating
ventilation port, safety grille, and at the rear, electric motor complete with wiring box, coupled to axial flow impeller.
Show products
CLOSE
19
PRODUCTS
VORTICEL E
Low-pressure plate axial fans
Wall-mounting axial flow ventilation units characterized by high efficiency and low noise emissions, with diameters between 250 and 600 mm and air flows from 1,000 m3/h to 7,700 m3/h. Structure: mounting panel of square outline
incorporating ventilation port, safety grille, and at the rear, electric motor complete with wiring box, coupled to axial flow impeller.
Show products
CLOSE
19
PRODUCTS
VORTICEL A-E
Compact plate axial fans
Wall-mounting axial flow fans characterized by high efficiency and low noise emissions, with diameters between 250 and 630 mm and air flows from 765 m3/h to 2640 m3/h. Structure: mounting panel of square outline incorporating ventilation port, safety grille, and at the rear, electric motor complete with wiring box, coupled to axial flow impeller.
Show products
CLOSE
14
PRODUCTS
E-ATEX
Axial plate-mounted fans for installation in pot entially explosive areas
Industrial axial fans of diameter between 250 e 600 mm and air flows from 1,000 m3/h to 6,900 m3/h, suitable for use in environments characterized by potentially explosive atmospheres created due to the presence of gas or dust
identifiable with Group II (according to Atex classification).
Show products
CLOSE
10
PRODUCTS
VORTICEL MPC-E
Medium-pressure long cased axial fans
Axial flow fans for in-line installation characterized by high efficiency and low noise emissions, with diameters between 250 and 400 mm and air flows from 1,180 m3/h to 5,200 m3/h. Construction featuring two drilled flange sections
of cylindrical geometry, bolted together and designed for connection to ducts of corresponding diameter, also the motor mounting, the motor itself (complete with wiring box), and the impeller.
Show products
CLOSE
15
PRODUCTS
TORRETTE RF-EU
Centrifugal roof fans with horizontal discharge
Centrifugal roof fans with air flow rates between 1350 m3/h and 14500 m3/h. The structure comprises a base of square geometry incorporating the inlet port, cylindrical safety grille, motor-fan unit, wiring box and protective cap.
Show products
CLOSE