Description

• Nominal diameter of blades 1600 mm
• Top and bottom motor covers moulded from heat-resistant and UV-resistant thermoplastic resin (ABS), colour white
• Wiring connections at end of ceiling rod concealed by domes moulded from impact- and UV-resistant PP, colour white.
• Single phase start capacitor motor with external rotor, and shaft turning in ball bearings.
• Maximum air flow: 14,000 m3/h.
• 3 sheet steel blades powder coated with scratch-resistant polyester, colour white.
• Steel ceiling rod with polyester powder coated finish, colour white, length 375 mm.
• Bag of accessories containing nuts and bolts required for assembly of blades, ceiling hook and rubber anti-vibration washer.
• Factory-prepared to accept Light Kit (optional), suitable for lamp rated 150W max with
E27 screw fitting, or equivalent energy-saving lamp with E27 screw fitting.
• Speed selectable by way of control units (optional)
Read full descriptionClose description

Certifications

nordik_international_plus_ambiente01
nordik_international_plus_ambiente02

Technical Data Sheet

  • Fan diameter
    160
  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    0,33
  • Max absorbed power (W)
    70
  • Voltage (V)
    220-240
  • Weight (Kg)
    6,90
  • giri_minuto
    201
  • Max airflow (m³/h)
    14000
  • Max airflow (m³/min)
    233,33
  • Max flow speed (m/s)
    1,34
  • RPM
    201
  • Service value (m³/min)/W
    3,333
  • Sound power Lw [dB(A)]
    55,6
  • Size A (mm)
    Ø 1524
  • Size B (mm)
    Ø 230
  • Size C (mm)
    495
quota

Accessories

Discover accessories related to the product

SCNR5 UNIFICATA NK SOFFITTO
SCNR5 UNIFICATA NK SOFFITTO
• 5-position speed controller for ceiling-mounted fans without light.
SCNRL5 UNIFICATA NK SOFFITTO
SCNRL5 UNIFICATA NK SOFFITTO
• 5-position speed controller for ceiling-mounted fans with light.
ASTA NK I 200 BIANCA
ASTA NK I 200 BIANCA
• NK I 200 White Rod to enable installation at desired height.
ASTA NK I 250 BIANCA
ASTA NK I 250 BIANCA
• NK I 250 White Rod to enable installation at desired height.
ASTA NK I 350 BIANCA
ASTA NK I 350 BIANCA
• NK 350 I White Rod to enable installation at desired height.
ASTA NK I 500 BIANCA
ASTA NK I 500 BIANCA
• NK I 500 White Rod enable installation at desired height.
ASTA NK I 750 BIANCA
ASTA NK I 750 BIANCA
• NK I 750 White Rod to enable installation at desired height.
ASTA NK I 1000 BIANCA
ASTA NK I 1000 BIANCA
• NK I 1000 White Rod to enable installation at desired height.
TELENORDIK 5T
TELENORDIK 5T
Infrared remote control suitable for ceiling fans with or without light.
• 5 selectable speeds, as well as fan and light on/off switch.
• “Timer” button to set f...
PLUS LIGHT KIT (KIT LUCE)
PLUS LIGHT KIT (KIT LUCE)
Light kit for all Nordik International Plus models.
• Lamp: max 150 W.
KIT SCB (TRASF.E.C.)
KIT SCB (TRASF.E.C.)
• Built-in controller adaptor.
KIT SCB5 (TRASF.5 V.)
KIT SCB5 (TRASF.5 V.)
Built-in controller adaptor.
• 5 speeds.
C 2.5 (COMANDO EL. 2.5 A)
C 2.5 (COMANDO EL. 2.5 A)
• Electronic speed controller.
• Maximum load 2.5 A.
SC 503 B
SC 503 B
Flush mounted speed controller.

• colour: White.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• Thanks to t...
SC 503 N
SC 503 N
Flush mounted speed controller.

• Colour: anthracite grey.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• T...
SC EXT B
SC EXT B
Wall mounted speed controller.

• colour: White.
• consists of the same unit as in the flush mounted version with the addition of a casing to be fitted to the ...
PSC-W
PSC-W
Face plate (white).
PSC-B
PSC-B
Face plate (anthracite grey).
SCI503
SCI503
Flush mounting 503 box able to house the control unit.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info