Description

• Fire-resistant expanded polypropylene enclosure with zinc-coated side plates.
• Duct connection ports of nominal diameter 150 mm.
• 2 x EC brushless motor with shaft turning in ball bearings; 3 speeds, which can be set independently at the moment of installation and monitored from a remote control panel connected by wire, with LCD display.
• Air flow settable between 100 m3/h and 365 m3/h.
• Ultra high-efficiency counter-flow type heat exchanger fashioned from moulded plastic (PS).
• 100% by-pass, automatically operated with filtration.
• Automatically activated system designed to prevent icing of the heat exchanger.
• Mod-Bus module with RS485 connection port in slave mode.
• Compatible with operation piloted by Vortice ambient sensors: temperature (C TEMP), relative humidity (C HCS), presence (C PIR) and smoke alarm (C SMOKE). With operation interlocked to sensors, the local control functions are inhibited: the appliance continues to operate at minimum speed as long as the reference parameters monitored by the connected field sensors remain below the relative threshold values; when these values are exceeded, the appliance will switch to the maximum speed setting, which is then maintained until such time as normal ambient conditions are restored.
• 2 x F5 filter (alternatively, option of F7 filter on outlet duct).
Read full descriptionClose description

Certifications

Energy label Energy label
hri_e_ambiente01

Technical Data Sheet

  • Filter class
    F5
  • Frequency (Hz)
    50
  • Insulation class
  • IP
    X2
  • Max absorbed current (A)
    1,4
  • Max absorbed power (W)
    167
  • Max absorbed power at Max speed (W)
    167
  • Nominal diameter (mm)
    125
  • Voltage (V)
    230
  • Weight (Kg)
    29,5
  • Breakout sound power LWA [dB(A)]
    69
  • Breakout sound pressure at 3m at Max speed calculated in free field Lp [dB(A)]
    48
  • Max airflow (l/s)
    101
  • Max airflow (m³/h)
    365
  • Max pressure (mmH2O)
    77,3
  • Max pressure (Pa)
    758
  • Max thermal efficiency (%)
    93
  • Sound power at exhaust inlet LWA [dB(A)]
    54
  • Sound power at supply outlet LWA [dB(A)]
    78
  • Sound pressure at 3m at extraction at Max speed calculated in free field Lp [dB(A)]
    34
  • Sound pressure at 3m at supply at Max speed calculated in free field Lp [dB(A)]
    57
  • Supplier's name or trade mark
    Vortice
  • Specific Energy Consumption (SEC) class in temperate climate zone
    A
  • Specific Energy Consumption (SEC) class in temperate climate zone [kWh/m2y]
    -38,8
  • Specific Energy Consumption class SEC in cold climate zone [kWh/m2y]
    -77,1
  • Specific Energy Consumption class SEC in warm climate zone [kWh/m2y]
    -14,3
  • Declared type
    UVR-B: bidirezionale
  • Type of drive
    variatore di velocità: VSD
  • Type of heat recovery system HRS
    a recupero
  • Thermal efficiency of heat recovery at reference airflow [%]
    87,5
  • Max airflow [m3/h]
    335
  • Fan drive electric power input, including any motor control equipment, at maximum flow rate [W]
    170,0
  • Sound power LWA [dB(A)]
    69
  • Reference airflow [m3/s]
    0,0651
  • Reference ? pressure [Pa]
    370
  • SPI [W/(m3/h)]
    0,28145
  • Control factor CTRL
    0,85
  • Control type
    amb. centralizzato
  • Max internal leakage rate [%]
    6,7
  • Max external leakage rate [%]
    2,5
  • Mixing rate
    NA
  • Position and description of visual filter warning
    Vedi libretto istruzioni
  • Airflow sensitivity to pressure variations at + 20 Pa and – 20 Pa
    NA
  • Indoor/outdoor air tightness [m3/h]
    NA
  • Annual electricity consumption (AEC) [kWh electricity/y]
    300
  • AHS temperate annual energy saved [kWh primary energy/y]
    4562
  • AHS cold annual energy saved [kWh primary energy/y]
    8924
  • AHS warm annual energy saved [kWh primary energy/y]
    2063
  • Ø (mm)
    149
  • Size A (mm)
    1640
  • Size B (mm)
    916
  • Size C (mm)
    290
  • Size D (mm)
    1500
  • Size E (mm)
    197
  • Size F (mm)
    238
  • Size G (mm)
    238
  • Size H (mm)
    543
quota
Curva_JPG_11226-Curve_per_Catalogo

Accessories

Discover accessories related to the product

C PIR
C PIR
• Passive infrared sensor.
FTR F7 230X250X48
FTR F7 230X250X48
ePM1 70% (F7) filter. Dimensions: 230x250x48 mm.
KIT STAFFE HRI-E TWO
KIT STAFFE HRI-E TWO
Bracket kit
PANNELLO INSTALLATORE SKP10
PANNELLO INSTALLATORE SKP10
Setting of machine parameters during initial installation procedures:
- speeds
- motors independently adjustable
- defrosting
- connection to any externa...
C TEMP
C TEMP
Environmental sensor for temperature control.
C SMOKE
C SMOKE
Environmental sensor for air quality.
C HCS
C HCS
Environmental sensor for relative humidity control.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info