VORT HR 300 NETI IoT

• Expanded polypropylene (PPE) casing.
• Aesthetic front panel made of plastic resin, glossy finish.
• Connection ports to pipes with a nominal diameter of 125 mm.
• 2 EC (brushless) motors with shafts mounted on ball bearings each combined with a forward blade centrifugal impeller; 3 speeds that can be independently set upon installation.
• Highly efficient crossflow type heat exchanger made of plastic material (PS).
• Automatic by-pass for free-cooling (manual operation available as an alternative).
• Wi-Fi module able to connect the product to the cloud and allowing management in automatic mode, based on predefined scenarios, easily adjustable by the user as needs change, or manually, even remotely, thanks to the App, using mobile devices such as smartphones or tablets. VORT HR 300 NETI IoT also offers the possibility to automatically modulate its operation based on the concentrations of relative humidity, carbon dioxide and pollutants inside the rooms, detected by sensors connected via the cloud, as well as the concentrations of external pollutants detected by Copernicus, the program that monitors the environment using satellite observations and in situ data.
• ePM10 50% (M5) and ISO Coarse 65% (G4) filters, located respectively in correspondence with the inlet and outlet ports. The occlusion status of the filters and the need for maintenance are visually shown on the control panel on the machine.
• Control panel located on the front cover which allows:
• The first configuration of the product;
• Manual setting of the operating mode;
• Automatic management of the product and monitoring of its correct functioning;
• System diagnostics;
• Constant monitoring of the condition of the filters and reporting the need for their maintenance/replacement;
• Updating the installed firmware release.
• Support bracket for wall installation integrated into the product.