Description

• Nominal diameter of blades 1400 mm
• Top and bottom motor covers moulded from heat-resistant and UV-resistant thermoplastic resin (ABS), colour wood grain.
• Wiring connections at end of ceiling rod concealed by domes moulded from impact- and UV-resistant thermoplastic resin (PP).
• Single phase start capacitor motor with external rotor, and shaft turning in ball bearings. Direction of rotation reversible.
• Maximum air flow 16,586 m3/h
• 3 galvanized sheet steel blades powder coated with scratch-resistant polyester, colour wood grain.
• Steel ceiling rod with scratch-resistant polyester powder coated finish, colour wood grain, length 375 mm.
• Bag of accessories containing nuts and bolts required for assembly of blades, ceiling hook and rubber anti-vibration washer.
• Factory-prepared to accept a specific optional light kit with 2x15 W max energy saving lamp, E27 screw fitting.
• Speed selectable by way of control units or Telenordik 5TR remote control (optional)
Read full descriptionClose description

Certifications

nordik_evolution_r_ambiente01

Technical Data Sheet

  • Fan diameter
    1488
  • Frequency (Hz)
    50/60*
  • Insulation class
  • Max absorbed current (A)
    0,35
  • Max absorbed power (W)
    70
  • Voltage (V)
    220-240
  • Weight (Kg)
    7,1
  • Max airflow (m³/h)
    16586
  • Max airflow (m³/min)
    276,43
  • Max flow speed (m/s)
    2,08
  • RPM
    197
  • Service value (m³/min)/W
    3,949
  • Sound power Lw [dB(A)]
    52,6


* Technical datas above refer to the product powered at 50 Hz.
For values for 60 Hz power supply, please contact the VORTICE Presales Service at prevendita@vortice-italy.com.

  • Size A (mm)
    980
  • Size B (mm)
    298
  • Size C (mm)
    495
  • Size D (mm)
    229
  • Size E (mm)
    724
  • Size F (mm)
    291
  • Size G (mm)
    145
  • Size H (mm)
    640
  • Size L (mm)
    291
quota

Accessories

Discover accessories related to the product

EVOLUTION LIGHT KIT ES
EVOLUTION LIGHT KIT ES
Lighting system kit for all Nordik Evolution fans.

• Model with two energy saving lamps with Edison E27 fittings.
• Max. power output: 15 W each (equival...
SCRR5
SCRR5
5-position speed controller for ceiling-mounted fans without light.

SCRR5L
SCRR5L
5-position speed controller for ceiling-mounted fans with light.

SCRR/M
SCRR/M
Electronic, reversible speed controller for use with up to 6 ceiling-mounted fans.

KIT SCBRR5/5L/M
KIT SCBRR5/5L/M
Kit to convert SCRR5 and SCRR5L 5-position controllers from surface to flush-mounted.
SC 503 B
SC 503 B
Flush mounted speed controller.

• colour: White.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• Thanks to t...
SC 503 N
SC 503 N
Flush mounted speed controller.

• Colour: anthracite grey.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• T...
SC EXT B
SC EXT B
Wall mounted speed controller.

• colour: White.
• consists of the same unit as in the flush mounted version with the addition of a casing to be fitted to the ...
SCI503
SCI503
Flush mounting 503 box able to house the control unit.
PSC-W
PSC-W
Face plate (white).
PSC-B
PSC-B
Face plate (anthracite grey).
TELENORDIK 5TR
TELENORDIK 5TR
Infrared remote control – 5 speeds – timer - reverse
• The receiver is hidden inside the fan casing, with only the tip in which the sensor is located protruding.
SET PALE 140/56 RAD.PLUS-EVOL. INT
SET PALE 140/56 RAD.PLUS-EVOL. INT
VORT DELTA T
VORT DELTA T
Multiple speed controller ensuring effective destratification to grant energy savings; VORT DELTA T automatically adapt the speed of up to 15 ceiling fans according to temperature ...
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info