Description

• Nominal diameter of blades 1600 mm
• Top and bottom motor covers moulded from heat-resistant and UV-resistant thermoplastic resin (ABS), colour white.
• Wiring connections at end of ceiling rod concealed by domes moulded from impact- and UV-resistant thermoplastic resin (PP).
• Single phase start capacitor motor with external rotor, and shaft turning in ball bearings. Direction of rotation reversible.
• Maximum air flow 17011 m3/h
• 3 galvanized sheet steel blades powder coated with scratch-resistant polyester, colour white.
• Steel ceiling rod with scratch-resistant polyester powder coated finish, colour white, length 375 mm.
• Bag of accessories containing nuts and bolts required for assembly of blades, ceiling hook and rubber anti-vibration washer.
• Factory-prepared to accept 2 specific optional light kits:
- with lamp rated 105 W max, E27 screw fitting
- with 2x15 W max energy saving lamp, E27 screw fitting (mandatory in EU).
• Speed selectable by way of control units or Telenordik 5TR remote control (optional)
Read full descriptionClose description

Certifications


Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation Class
  • Voltage (V)
    220-240
  • Airflow speed at max speed (m/s)
    1,63
  • Delivery max (m³/h)
    17011
  • Delivery max (m³/min)
    283,52
  • RPM
    193
  • Service value (m³/min)/W
    4,050
  • Sound power level Lw [dB(A)]
    55,6
  • Size A (mm)
    980
  • Size B (mm)
    298
  • Size C (mm)
    495
  • Size D (mm)
    229
  • Size E (mm)
    724
  • Size F (mm)
    291
  • Size G (mm)
    145
  • Size H (mm)
    640
  • Size L (mm)
    291
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

EVOLUTION LIGHT KIT
EVOLUTION LIGHT KIT
Lighting system kit for all Nordik Evolution fans.

• Model with one traditional incandescent bulb with Edison E27 fitting.
• Max. power output 150 W.
EVOLUTION LIGHT KIT ES
EVOLUTION LIGHT KIT ES
Lighting system kit for all Nordik Evolution fans.

• Model with two energy saving lamps with Edison E27 fittings.
• Max. power output: 15 W each (equival...
SCRR5
SCRR5
5-position speed controller for ceiling-mounted fans without light.

SCRR/M
SCRR/M
Electronic, reversible speed controller for use with up to 6 ceiling-mounted fans.

KIT SCBRR5/5L/M
KIT SCBRR5/5L/M
Kit to convert SCRR5 and SCRR5L 5-position controllers from surface to flush-mounted.
SC 503 B
SC 503 B
Flush mounted speed controller.

• colour: White.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• Thanks to t...
SC 503 N
SC 503 N
Flush mounted speed controller.

• Colour: anthracite grey.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• T...
SC EXT B
SC EXT B
Wall mounted speed controller.

• colour: White.
• consists of the same unit as in the flush mounted version with the addition of a casing to be fitted to the ...
SCI503
SCI503
Flush mounting 503 box able to house the control unit.
PSC-W
PSC-W
Face plate (white).
PSC-B
PSC-B
Face plate (anthracite grey).
SCRR5L
SCRR5L
5-position speed controller for ceiling-mounted fans with light.

ASTA NK I 200 BIANCA
ASTA NK I 200 BIANCA
• NK I 200 White Rod to enable installation at desired height.
ASTA NK I 250 BIANCA
ASTA NK I 250 BIANCA
• NK I 250 White Rod to enable installation at desired height.
ASTA NK I 350 BIANCA
ASTA NK I 350 BIANCA
• NK 350 I White Rod to enable installation at desired height.
ASTA NK I 500 BIANCA
ASTA NK I 500 BIANCA
• NK I 500 White Rod enable installation at desired height.
ASTA NK I 750 BIANCA
ASTA NK I 750 BIANCA
• NK I 750 White Rod to enable installation at desired height.
ASTA NK I 1000 BIANCA
ASTA NK I 1000 BIANCA
• NK I 1000 White Rod to enable installation at desired height.
TELENORDIK 5TR
TELENORDIK 5TR
Infrared remote control – 5 speeds – timer - reverse
• The receiver is hidden inside the fan casing, with only the tip in which the sensor is located protruding.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info