Description

• Nominal diameter of blades 900 mm
• Top and bottom motor covers moulded from heat-resistant and UV-resistant thermoplastic resin (ABS), colour white.
• Wiring connections at end of ceiling rod concealed by domes moulded from impact- and UV-resistant thermoplastic resin (PP).
• Single phase start capacitor motor with external rotor, and shaft turning in ball bearings. Direction of rotation reversible.
• Maximum air flow 11592 m3/h
• 3 galvanized sheet steel blades powder coated with scratch-resistant polyester, colour white.
• Steel ceiling rod with scratch-resistant polyester powder coated finish, colour white, length 375 mm.
• Bag of accessories containing nuts and bolts required for assembly of blades, ceiling hook and rubber anti-vibration washer.
• Factory-prepared to accept 2 specific optional light kits:
? with lamp rated 105 W max, E27 screw fitting
? with 2x15 W max energy saving lamp, E27 screw fitting (mandatory in EU).
• Speed selectable by way of control units or Telenordik 5TR remote control (optional)
Read full descriptionClose description

Certifications


Technical Data Sheet

  • Absorbed Current max (A)
    0,34
  • Absorbed Power max (W)
    70
  • Blades diameter
    980
  • Frequency (Hz)
    50
  • Insulation Class
  • Voltage (V)
    220-240
  • Weight (Kg)
    6,4
  • Airflow speed at max speed (m/s)
    3,52
  • Delivery max (m³/h)
    11592
  • Delivery max (m³/min)
    193,20
  • RPM
    200
  • Service value (m³/min)/W
    2,760
  • Sound power level Lw [dB(A)]
    46,1
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

EVOLUTION LIGHT KIT ES
EVOLUTION LIGHT KIT ES
Lighting system kit for all Nordik Evolution fans.

• Model with two energy saving lamps with Edison E27 fittings.
• Max. power output: 15 W each (equival...
EVOLUTION LIGHT KIT
EVOLUTION LIGHT KIT
Lighting system kit for all Nordik Evolution fans.

• Model with one traditional incandescent bulb with Edison E27 fitting.
• Max. power output 150 W.
TELENORDIK 5TR
TELENORDIK 5TR
Infrared remote control – 5 speeds – timer - reverse
• The receiver is hidden inside the fan casing, with only the tip in which the sensor is located protruding.
SCRR5
SCRR5
5-position speed controller for ceiling-mounted fans without light.

SCRR/M
SCRR/M
Electronic, reversible speed controller for use with up to 6 ceiling-mounted fans.

KIT SCBRR5/5L/M
KIT SCBRR5/5L/M
Kit to convert SCRR5 and SCRR5L 5-position controllers from surface to flush-mounted.
SC 503 B
SC 503 B
Flush mounted speed controller.

• colour: White.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• Thanks to t...
SC 503 N
SC 503 N
Flush mounted speed controller.

• Colour: anthracite grey.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• T...
SC EXT B
SC EXT B
Wall mounted speed controller.

• colour: White.
• consists of the same unit as in the flush mounted version with the addition of a casing to be fitted to the ...
SCI503
SCI503
Flush mounting 503 box able to house the control unit.
PSC-W
PSC-W
Face plate (white).
PSC-B
PSC-B
Face plate (anthracite grey).
SCRR5L
SCRR5L
5-position speed controller for ceiling-mounted fans with light.

ASTA NK I 200 BIANCA
ASTA NK I 200 BIANCA
• NK I 200 White Rod to enable installation at desired height.
ASTA NK I 250 BIANCA
ASTA NK I 250 BIANCA
• NK I 250 White Rod to enable installation at desired height.
ASTA NK I 350 BIANCA
ASTA NK I 350 BIANCA
• NK 350 I White Rod to enable installation at desired height.
ASTA NK I 500 BIANCA
ASTA NK I 500 BIANCA
• NK I 500 White Rod enable installation at desired height.
ASTA NK I 750 BIANCA
ASTA NK I 750 BIANCA
• NK I 750 White Rod to enable installation at desired height.
ASTA NK I 1000 BIANCA
ASTA NK I 1000 BIANCA
• NK I 1000 White Rod to enable installation at desired height.
SET PALE NK I PLUS 90/36 BIANCO INT.
SET PALE NK I PLUS 90/36 BIANCO INT.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info