Description

• Fire-resistant expanded polypropylene enclosure with zinc-coated side plates.
• Duct connection ports of nominal diameter 125 mm.
• 2 x EC brushless motor with shaft turning in ball bearings; 3 speeds, which can be set independently at the moment of installation and monitored from a remote control panel connected by wire, with LCD display.
• Air flow settable between 85 m3/h and 185 m3/h.
• Ultra high-efficiency counter-flow type heat exchanger fashioned from moulded plastic (PS).
• 100% by-pass, automatically operated with filtration.
• Automatically activated system designed to prevent icing of the heat exchanger.
• Mod-Bus module with RS485 connection port in slave mode
• Compatible with operation piloted by Vortice ambient sensors: temperature (C TEMP), relative humidity (C HCS), presence (C PIR) and smoke alarm (C SMOKE). With operation interlocked to sensors, the local control functions are inhibited: the appliance continues to operate at minimum speed as long as the reference parameters monitored by the connected field sensors remain below the relative threshold values; when these values are exceeded, the appliance will switch to the maximum speed setting, which is then maintained until such time as normal ambient conditions are restored.
• 2 x F5 filter (alternatively, option of F7 filter on outlet duct).
Read full descriptionClose description

Certifications

Energy label Energy label

Technical Data Sheet

  • Absorbed Current max (A)
    0,55
  • Absorbed Power max (W)
    71
  • Filter class
    F5
  • Frequency (Hz)
    50
  • Insulation Class
  • IP
    X2
  • Max ambient temperature for continuous operation (°C)
    45
  • Max Temperature of Exhaust Air (Continuous Operation)
    45
  • Min ambient temperature for continuous operation (°C)
    0
  • Nominal Diameter (mm)
    125
  • Voltage (V)
    230
  • Weight (Kg)
    17,5
  • Delivery max (l/s)
    52
  • Delivery max (m³/h)
    187
  • Maximum thermal efficiency (%)
    94
  • Pressure max (mmH2O)
    23,7
  • Pressure max (Pa)
    232
  • Sound power level - radiated Lw [dB(A)]
    56
  • Sound power level exhaust inlet Lw [dB(A)]
    47
  • Sound power level supply outlet Lw [dB(A)]
    44
  • Sound pressure level air extraction Lp [dB (A)] 3m - max speed
    26
  • Sound pressure level air supply Lp [dB (A)] 3m - max speed
    23
  • Sound pressure level radiated Lp [dB (A)] 3m - max speed
    35
  • Supplier's name or trade mark
    Vortice
  • Specific Energy Consumption class SEC in average climate zone
    A
  • Specific Energy Consumption class SEC average [kWh/m2a]
    -38,0
  • Specific Energy Consumption class SEC cold [kWh/m2a]
    -76,8
  • Specific Energy Consumption class SEC warm [kWh/m2a]
    -13,1
  • Declared typology
    UVR-B: bidirezionale
  • Type of drive
    variatore di velocità: VSD
  • Type of heat recovery system HRS
    a recupero
  • Thermal efficiency of heat recovery at reference air flow [%]
    89,8
  • Maximum flow rate [m3/h]
    134
  • Electric power input of the fan drive, including any motor control equipment, at maximum flow rate [W]
    65,5
  • Sound power level LWA [dB(A)]
    56
  • Reference flow rate [m3/s]
    0,0261
  • Reference pressure difference [Pa]
    50
  • SPI [W/(m3/h)]
    0,34648
  • Control factor CTRL
    0,85
  • Control typology
    amb. centralizzato
  • Maximum internal leakage rates [%]
    1
  • Maximum external leakage rates [%]
    3,9
  • Mixing rate
    NA
  • Position and description of visual filter warning
    Vedi libretto istruzioni
  • Airflow sensitivity to pressure variations at + 20Pa and – 20 Pa
    NA
  • Indoor/outdoor air tightness [m3/h]
    NA
  • Annual electricity consumption (AEC) [kWh electricity/a]
    359
  • AHS average Annual heating saved [kWh primary energy/a]
    4624
  • AHS cold Annual heating saved [kWh primary energy/a]
    9046
  • AHS warm Annual heating saved [kWh primary energy/a]
    2091
  • Diametro Ø (mm)
    123
  • Size A (mm)
    1350
  • Size B (mm)
    690
  • Size C (mm)
    244
  • Size D (mm)
    1485
  • Size E (mm)
    720
  • Size F (mm)
    250
  • Size G (mm)
    256
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

FTR F7 200X183X48
FTR F7 200X183X48
F7 internal filter (single) for HRI-E ONE version.
KIT STAFFE HRI-E ONE
KIT STAFFE HRI-E ONE
Fixing brackets Kit.
FTR M5 200X183X48
FTR M5 200X183X48
C PIR
C PIR
• Passive infrared sensor.
PANNELLO INSTALLATORE SKP10
PANNELLO INSTALLATORE SKP10
Setting of machine parameters during initial installation procedures:
- speeds
- motors independently adjustable
- defrosting
- connection to any externa...
PRE-HEATING BOX HRI-E ONE
PRE-HEATING BOX HRI-E ONE
500 W pre-heater to warm the incoming air.

• The heater will operate automatically for the minimum time needed and will ensure the problem of frosting is solved.
C TEMP
C TEMP
Environmental sensor for temperature control.
C SMOKE
C SMOKE
Environmental sensor for air quality.
C HCS
C HCS
Environmental sensor for relative humidity control.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info