Description
• Duct heater
• To be installed in the ventilation system, always after the fan, and/or the noise attenuator/air filter.
• Suitable for mono phase and three phase systems.
• Galvanized steel box, stainless steel electrical resistances carried by tubular duct in galvanized steel.
• Automatic security thermostat set on 60 °C (±15%) linked in a series with a second security thermostat with manual reset (RESET) set on 120 °C ± 15%.
• Operative temperature from –30 °C to +50 °C (not suitable with powders or chemical agents).
• Minimum air volume is based on a minimum air speed of 2m/s.
• To be installed in the ventilation system, always after the fan, and/or the noise attenuator/air filter.
• Suitable for mono phase and three phase systems.
• Galvanized steel box, stainless steel electrical resistances carried by tubular duct in galvanized steel.
• Automatic security thermostat set on 60 °C (±15%) linked in a series with a second security thermostat with manual reset (RESET) set on 120 °C ± 15%.
• Operative temperature from –30 °C to +50 °C (not suitable with powders or chemical agents).
• Minimum air volume is based on a minimum air speed of 2m/s.
Technical Data Sheet
-
Frequency (Hz)50
-
Insulation classI°
-
Max absorbed current (A)5,2
-
Max absorbed power (W)1200
-
Number of phases (Ph)1
-
Voltage (V)230
-
Weight (Kg)3,56
-
Size A (mm)150
-
Size B (mm)285
-
Size C (mm)40
-
Size D (mm)150
-
Size E (mm)380
-
Size F (mm)250
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.