Description

• Zinc-coated pressed steel enclosure with removable panels.
• 2 x EC brushless motor with shafts turning in ball bearings, coupled to centrifugal impellers.
• Trimmer control allowing selection of speeds from 0 to Max in response to system pressure losses.
• Ventilation air flow between 140 m3/h and 250 m3/h.
Dehumidifying air flow between 250 m3/h and 500 m3/h.
• Ultra high-efficiency counter-flow type heat exchanger fashioned from moulded plastic (PS)
• It contains fluorinated greenhouse gases.
• Compressor operating with HFC-R410A refrigerant
• Prewired for mechanical thermo-hygrostat (product code 22609)
• Dual water/air condenser
• Flow switch
• Three-way modulating valve
• Motorized recirculation damper
• Antifreeze protection
• 2 x G4 filters
• Electronic control unit with microprocessor and LCD display
• Remote control panel RCP (code 22607) available as optional
• Hermetically sealed equipment.
Read full descriptionClose description

Certifications


Technical Data Sheet

  • Absorbed power of extract fan (reg. Min /Nominal/Max) (W)
    22/40/68/
  • Absorbed power of supply fan (reg. Min /Nominal/Max) (W)
    30/60/130/
  • Compressor nominal absorbed power (W)
    480
  • Filter class
    M5
  • Frequency (Hz)
    50
  • Indoor total cooling capacity (W)
    2820
  • Insulation class
  • IP
    X2
  • Nominal diameter (mm)
    160
  • Refrigerant type
    R410A
  • Sensible heat recovery in winter
    1850
  • Voltage (V)
    230
  • Weight (Kg)
    80
  • Airflow in summer mode (m3/h)
    500
  • Airflow in winter mode (m3/h)
    150-240
  • Dehumidification capacity (l/24 hr)
    61,8
  • Nominal pressure drop of hydraulic circuit (kPa)
    35
  • Pressure of extract fan (Pa)
    50-140
  • Pressure of supply fan (Pa)
    50/140/
  • Sound power Lw [dB(A)]
    52
  • Sound pressure Lp [dB (A)] at 3 m
    44
  • Summer nominal efficiency (%)
    72
  • Water coil flow rate (reg. Min /Nominal/Max) (l/h)
    200/350/600/
  • Winter nominal efficiency (%)
    90
  • Supplier's name or trade mark
    NA
  • Condensate drain pipe Ø C (mm)
    20
  • Size A (mm)
    756
  • Size B (mm)
    1308
  • Size C (mm)
    405
  • Size D (mm)
    802
  • Size E (mm)
    1074
  • Size F (mm)
    117
  • Size G (mm)
    117
  • Size H (mm)
    38
  • Size I (mm)
    224
  • Size L (mm)
    114
  • Size N (mm)
    832
  • Vent diameter Ø A (mm)
    160
  • Water discharge pipe Ø B (mm)
    1/2"
quota

Accessories

Discover accessories related to the product

RCP (HRI DH)
RCP (HRI DH)
MTRH (HRI DH)
MTRH (HRI DH)
RS 485 PCB (HRI DH)
RS 485 PCB (HRI DH)
R2T 500 (HRI DH)
R2T 500 (HRI DH)
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info