Description

• Nominal diameter of blades 1400 mm
• Top and bottom motor covers moulded from heat-resistant and UV-resistant thermoplastic resin (ABS), colour silver.
• Wiring connections at end of ceiling rod concealed by domes moulded from impact- and UV-resistant thermoplastic resin (PP).
• Single phase start capacitor motor with external rotor, and shaft turning in ball bearings. Direction of rotation reversible.
• Maximum air flow 16,586 m3/h
• 3 galvanized sheet steel blades powder coated with scratch-resistant polyester, colour silver.
• Steel ceiling rod with scratch-resistant polyester powder coated finish, colour silver, length 375 mm.
• Bag of accessories containing nuts and bolts required for assembly of blades, ceiling hook and rubber anti-vibration washer.
• Factory-prepared to accept 2 specific optional light kits:
- with lamp rated 105 W max, E27 screw fitting
- with 2x15 W max energy saving lamp, E27 screw fitting (mandatory in EU).
• Speed selectable by way of control units or Telenordik 5TR remote control (optional)
Read full descriptionClose description

Certifications


Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation Class
  • Voltage (V)
    220-240
  • Airflow speed at max speed (m/s)
    2,08
  • Delivery max (m³/h)
    16586
  • Delivery max (m³/min)
    276,43
  • RPM
    197
  • Service value (m³/min)/W
    3,949
  • Sound power level Lw [dB(A)]
    52,6
  • Size A (mm)
    980
  • Size B (mm)
    298
  • Size C (mm)
    495
  • Size D (mm)
    229
  • Size E (mm)
    724
  • Size F (mm)
    291
  • Size G (mm)
    145
  • Size H (mm)
    640
  • Size L (mm)
    291
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

EVOLUTION LIGHT KIT
EVOLUTION LIGHT KIT
Lighting system kit for all Nordik Evolution fans.

• Model with one traditional incandescent bulb with Edison E27 fitting.
• Max. power output 150 W.
EVOLUTION LIGHT KIT ES
EVOLUTION LIGHT KIT ES
Lighting system kit for all Nordik Evolution fans.

• Model with two energy saving lamps with Edison E27 fittings.
• Max. power output: 15 W each (equival...
SCRR5
SCRR5
5-position speed controller for ceiling-mounted fans without light.

SCRR5L
SCRR5L
5-position speed controller for ceiling-mounted fans with light.

SCRR/M
SCRR/M
Electronic, reversible speed controller for use with up to 6 ceiling-mounted fans.

KIT SCBRR5/5L/M
KIT SCBRR5/5L/M
Kit to convert SCRR5 and SCRR5L 5-position controllers from surface to flush-mounted.
SC 503 B
SC 503 B
Flush mounted speed controller.

• colour: White.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• Thanks to t...
SC 503 N
SC 503 N
Flush mounted speed controller.

• Colour: anthracite grey.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• T...
SC EXT B
SC EXT B
Wall mounted speed controller.

• colour: White.
• consists of the same unit as in the flush mounted version with the addition of a casing to be fitted to the ...
SCATOLA INCASSO TIPO 503
SCATOLA INCASSO TIPO 503
Flush mounting 503 box able to house the control unit.
PLACCA PER SC 503 B
PLACCA PER SC 503 B
Face plate (white).
PLACCA PER SC 503 N
PLACCA PER SC 503 N
Face plate (anthracite grey).
ASTA NK I 250 ARGENTO
ASTA NK I 250 ARGENTO
• NK I 250 silver Rod to enable installation at desired height.
ASTA NK I 350 ARGENTO
ASTA NK I 350 ARGENTO
ASTA NK I 500 ARGENTO
ASTA NK I 500 ARGENTO
• NK I 500 silver Rod to enable installation at desired height.
ASTA NK I 750 ARGENTO
ASTA NK I 750 ARGENTO
• NK I 750 silver Rod to enable installation at desired height.
ASTA NK I 1000 ARGENTO
ASTA NK I 1000 ARGENTO
• NK I 1000 silver Rod to enable installation at desired height.
TELENORDIK 5TR
TELENORDIK 5TR
Infrared remote control – 5 speeds – timer - reverse
• The receiver is hidden inside the fan casing, with only the tip in which the sensor is located protruding.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info