Description

• Plastic (PPE) enclosure
• Inner panel in plastic polymer (ABS), lined with insulating material.
• Low voltage ball bearing EC (brushless) motor.
• 5 speeds corresponding to differents airflows levels: 10 m3/h; 16 m3/h; 22 m3/h; 30 m3/h and 40 m3/h.
• High efficiency ceramic heat exchanger.
• Rubber made grille, with easy mount from inside.
• Mesh to be inserted at installation in the duct together with the external grille
• Nominal hole diameter: 160 mm
• Integrated washable G3 filter, easily accessible for maintenance.
• On-board commands for switching on/off and selection of operation mode.
• Compatible with wall wiring connection
• Electronic board with integrated power supply.
• Humidistat function piloted by RH sensor (4 preset thresholds: 60%, 70%, 80%, 90%, selectable during installation), designed to automatically switch on or pass at maximum speed the fan. The pcb allows to automatically shut off the motor or to came back at preset speed, when relative humidity returns below the threshold value.
• Filter status indicator LED.
• 3 operation modes:
o Ventilation with heat recovery;
o Extraction;
o Intake.
Read full descriptionClose description

Certifications

Energy label Energy label

Technical Data Sheet

  • Absorbed Current max (A)
    0.053
  • Absorbed power 1st speed (W)
    1.0
  • Absorbed Power max (W)
    5.5
  • Filter class
    G3
  • Frequency (Hz)
    50/60
  • Insulation Class
    II°
  • IP
    X4
  • Max ambient temperature for continuous operation (°C)
    30
  • Max Temperature of Exhaust Air (Continuous Operation)
    30
  • Max. absorbed Current at max. speed (A)
    0.053
  • Max. absorbed Current at min. speed (A)
    0.015
  • Max. absorbed power at max speed (W)
    5.5
  • Min ambient temperature for continuous operation (°C)
    0
  • Voltage (V)
    220-240
  • Weight (Kg)
    2,6
  • Delivery 1st speed (l/s)
    2.77
  • Delivery 1st speed (m³/h)
    10.0
  • Delivery max (l/s)
    11.1
  • Delivery max (m³/h)
    40.0
  • Max delivery at max speed (l/s)
    11.1
  • Max delivery at max speed (m³/h)
    40.0
  • Maximum thermal efficiency (%)
    90
  • Pressure - 1st speed (mmH20)
    0.635
  • Pressure - 1st speed (Pa)
    6.22
  • Pressure max - max speed (mmH20)
    4.1
  • Pressure max - max speed (Pa)
    40.6
  • Pressure max (mmH2O)
    4.1
  • Pressure max (Pa)
    40.6
  • Sound pressure level Lp in free field [dB(A)] 3 m max speed
    23.6
  • Sound pressure level Lp in free field [dB(A)] 3 m min speed
    <16
  • Supplier's name or trade mark
    Vortice
  • Specific Energy Consumption class SEC in average climate zone
    NA
  • Declared typology
    UVR-U: unidirezionale
  • Type of drive
    velocità multiple: VM
  • Type of heat recovery system HRS
    a recupero
  • Control factor CTRL
    1
  • Control typology
    manuale
  • Specific Energy Consumption class SEC average [kWh/m2a]
    -37,2
  • Specific Energy Consumption class SEC cold [kWh/m2a]
    -80,8
  • Specific Energy Consumption class SEC warm [kWh/m2a]
    -12,3
  • Thermal efficiency of heat recovery at reference air flow [%]
    90
  • Maximum flow rate [m3/h]
    31
  • Electric power input of the fan drive, including any motor control equipment, at maximum flow rate [W]
    5,1
  • Sound power level LWA [dB(A)]
    44
  • Reference flow rate [m3/s]
    0,0060
  • Reference pressure difference [Pa]
    19
  • SPI [W/(m3/h)]
    0,23963
  • Maximum internal leakage rates [%]
    NA
  • Maximum external leakage rates [%]
    NA
  • Mixing rate
    NA
  • Position and description of visual filter warning
    NA
  • Airflow sensitivity to pressure variations at + 20Pa and – 20 Pa
    0,27
  • Indoor/outdoor air tightness [m3/h]
    NA
  • Annual electricity consumption (AEC) [kWh electricity/a]
    330
  • AHS average Annual heating saved [kWh primary energy/a]
    4550
  • AHS cold Annual heating saved [kWh primary energy/a]
    8901
  • AHS warm Annual heating saved [kWh primary energy/a]
    2057
  • Size A (mm)
    240
  • Size B (mm)
    224
  • Size C (mm)
    113
  • Size D (mm)
    95
  • Size E (mm)
    49
  • Size F (mm)
    275
  • Size G (mm)
    42
  • Size H (mm)
    18
  • Size I (mm)
    ø 151
  • Size J (mm)
    ø 146
  • Size K (mm)
    ø 153
  • Size L (mm)
    ø 216
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

TUBO PVC D.160 L=700 (HRW)
TUBO PVC D.160 L=700 (HRW)
PVC hose for wall mounting on 400 mm up to 700 mm walls
MWS
MWS
Outside stainless steel windshield panel.
RGR
RGR
Rubber exterior grill to be installed from inside, without using scaffolding.
WA
WA
90 ° round / square adapter for intake and discharge through the window jamb.
WSG-INOX
WSG-INOX
Rectangular stainless steel grille for WA kit.
WSG-W
WSG-W
Rectangular stainless steel powder coated grille, white RAL 9003, for WA kit.
KIT FILTRI HRW 20 MONO
KIT FILTRI HRW 20 MONO
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info