Description

• Material: UV resistant plastic (prevents ageing caused by exposure to sunlight).
• Nominal diameter: 100 mm
• 2 speed motor with thermal overload protection and shaft turning in self-lubricating bushings, coupled to a centrifugal impeller.
• Minimum air flow 86 m3/h
• Maximum air flow: 140 m3/h
• Protective grille on inlet port
• IMQ SAFETY and IMQ PERFORMANCE certifications
• Vortice speed controller.
Read full descriptionClose description

Certifications


Technical Data Sheet

  • Absorbed Current max (A)
    0,16
  • Absorbed power 1st speed (W)
    29
  • Absorbed Power max (W)
    35
  • Frequency (Hz)
    50
  • Insulation Class
    II°
  • IP
    X2
  • Max ambient temperature for continuous operation (°C)
    40
  • Max. absorbed Current at min. speed (A)
    0,12
  • Nominal Diameter (mm)
    100
  • Ø Discharge Hole (mm)
    97
  • Voltage (V)
    220-240
  • Weight (Kg)
    1,27
  • Delivery 1st speed (l/s)
    23,9
  • Delivery 1st speed (m³/h)
    86
  • Max delivery at max speed (l/s)
    38,9
  • Max delivery at max speed (m³/h)
    140
  • Pressure - 1st speed (mmH20)
    13,5
  • Pressure - 1st speed (Pa)
    132
  • Pressure max - max speed (mmH20)
    17
  • Pressure max - max speed (Pa)
    157
  • RPM max
    2180
  • RPM min
    1410
  • Sound pressure level Lp [dB (A)] 3m - max speed
    43
  • Sound pressure level Lp [dB (A)] 3m - min speed
    33
  • Supplier's name or trade mark
    Vortice
  • Specific Energy Consumption class SEC in average climate zone
    NA
  • Specific Energy Consumption class SEC average [kWh/m2a]
    -2,2
  • Specific Energy Consumption class SEC cold [kWh/m2a]
    -10,9
  • Specific Energy Consumption class SEC warm [kWh/m2a]
    10,1
  • Declared typology
    UVR-U: unidirezionale
  • Type of drive
    NA
  • Type of heat recovery system HRS
    assente
  • Thermal efficiency of heat recovery at reference air flow [%]
    NA
  • Maximum flow rate [m3/h]
    75
  • Electric power input of the fan drive, including any motor control equipment, at maximum flow rate [W]
    29,2
  • Sound power level LWA [dB(A)]
    62
  • Reference flow rate [m3/s]
    0,0146
  • Reference pressure difference [Pa]
    82
  • SPI [W/(m3/h)]
    0,47619
  • Control factor CTRL
    1
  • Control typology
    manuale
  • Maximum internal leakage rates [%]
    NA
  • Maximum external leakage rates [%]
    NA
  • Mixing rate
    NA
  • Position and description of visual filter warning
    NA
  • Airflow sensitivity to pressure variations at + 20Pa and – 20 Pa
    NA
  • Indoor/outdoor air tightness [m3/h]
    NA
  • Annual electricity consumption (AEC) [kWh electricity/a]
    597
  • AHS average Annual heating saved [kWh primary energy/a]
    1715
  • AHS cold Annual heating saved [kWh primary energy/a]
    2732
  • AHS warm Annual heating saved [kWh primary energy/a]
    632
  • Size A (mm)
    168
  • Size B (mm)
    Ø 176
  • Size C (mm)
    25
  • Size D (mm)
    Ø 97
  • Size E (mm)
    93
  • Size F (mm)
    281
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

C 1.5 (COMANDO EL. 1.5 A)
C 1.5 (COMANDO EL. 1.5 A)
Electronic speed controller. Maximum load: 1.5 A.
CA-MU  (STAFFE DI SOSTEGNO)
CA-MU (STAFFE DI SOSTEGNO)
• Galvanized sheet-metal brackets for wall or ceiling mounting. Complete in packs of 2.
SCNRB SCAT.COM.NON REV.INCASSO
SCNRB SCAT.COM.NON REV.INCASSO
• Non-reversible electronic speed controller. • Built-in.
KIT SCB (TRASF.E.C.)
KIT SCB (TRASF.E.C.)
• Built-in controller adaptor.
DEVIATORE DI FLUSSO M 10/4
DEVIATORE DI FLUSSO M 10/4
• For fitting to the delivery side of extractor fans to direct the air flow in any required direction within 360°.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info